Àdàkọ:Convert/doc

Lát'ọwọ́ Wikipedia, ìwé ìmọ̀ ọ̀fẹ́

Usage[àtúnṣe àmìọ̀rọ̀]

This template shows measurement quantities as primary and converted secondary units (or ranges), with optional rounding, wikilinks, abbreviation, or US spellings, and various separators including:  parentheses "( )", "or", hyphens, comma, "to" or dashes. The can help users by generating correct conversions from one unit of measurement to another, particularly for more complex units. It's also useful by making the text adhere to the Manual of Style. The text the template generates does not differ from a plain text equivalent, however.

Styles include: distance "32 metres (105 ft)" and "32 metres or 105 feet"; temperature "18 °C (64 °F)"; mass "55.0 kg (121.3 lb)" or "65 to 80 kg (143 to 176 lb)"; etc. For units see: Convert/list of units.

Options include:  lk=in, abbr=on, abbr=off, sp=us, adj=on, adj=mid, disp=x, disp=table and sortable=on (explained below). By default, output is rounded to match the precision of input; alternatives include: sigfig=3 or using the end parameter, such as "|1" to show tenths or "|-2" to show full 100's, etc.

Single value:

{{convert|value|in_unit|out_unit|round_to|...}}

Range of 2 values, or set of 3 or 4 (see below for list of range options):

{{convert|val1|range|val2 |in_unit|out_unit|round_to|...}}
{{convert/3 |val1|range|val2|words|val3|in_unit|out_unit|round_to|...}}
{{convert/4 |val1|words|val2|words|val3|words|val4|in_unit|out_unit|...}}
  • Numbers must be entered in unformatted form (without commas). Values output by the template will be displayed formatted and with a true minus sign where appropriate. To specify with commas, re-code a number as {{formatnum:9,000,500|R}} (becomes 9000500).
  • Optional parameters, in examples below, allow abbreviated units (abbr=on), or U.S. spellings (sp=us for meter), or hyphenation (adj=on), etc.
  • For this template many levels of substitution are possible, hence doing this fully, step by step, is cumbersome. Use Special:ExpandTemplates instead.
  • The template has very limited in-built capacity for dimensional analysis. It is therefore up to the user to ensure that most input and output units are compatible. Do not, for example, attempt to convert barrels to tonnes (but see {{bbl to t}}). Also beware of units with similar names; the code oz, for example, is for the avoirdupois ounce (a unit of mass), do not use this if you want fluid ounces. Note also that the code lb gives pounds mass, for pounds force use lbf.
  • An attempt to convert a unit to itself, e.g., km to km, will result in a template loop.
  • The range functionality is not fully implemented for all units, so experimentation may be required.
  • This documentation page tends to lag behind in terms of what the template can do. For details see the talk page and its archives.

Examples[àtúnṣe àmìọ̀rọ̀]

Single value[àtúnṣe àmìọ̀rọ̀]

Input Displays as
{{convert|3.21|kg|lb}} 3.21 kilograms (7.1 lb)
{{convert|3.21|kg|lb|0}} 3.21 kilograms (7 lb)
{{convert|10|kg|lb|disp=or}} 10 kilograms or 22 pounds
{{convert|6|ft|5|in|m}} 6 feet 5 inches (1.96 m)
{{convert|10|mi}} 10 miles (16 km)
{{convert|100|mpgus}} 100 miles per US gallon (2.4 L/100 km; 120 mpg‑imp)
{{convert|120|km/h}} 120 kilometres per hour (75 mph)
{{convert|18|°C|°F}} 18 °C (64 °F)
{{convert|1250|sqft|m2|lk=in|sigfig=2}} 1,250 square feet (120 m2)
Note 'lk=in' links only the input unit. This example is for illustration only, common units of measurement should not be linked. See: wp:overlink.
{{convert|20.5|m3|cuyd|lk=out|abbr=on}} 20.5 m3 (26.8 cu yd)
Note 'lk=out' links only the output unit, cu yd.
{{convert|641|acre|ha sqmi|lk=on}} 641 acres (259 ha; 1.002 sq mi)
Note 'lk=on' links all units. Per guidelines, common units should not be linked. See: wp:overlink.
{{convert|641|acre|ha sqmi|2|lk=on}} 641 acres (259.40 ha; 1.00 sq mi)
Although 640 acres equals 1 square mile; 641 acres rounded to two decimal places equals 1.00 sq mi.

Range of 2 values[àtúnṣe àmìọ̀rọ̀]

Note: not yet operational for all units
Input Displays as
{{convert|60|and|170|kg|lb}} 60 and 170 kilograms (130 and 370 lb)
{{convert|60|to|170|kg|lb}} 60 to 170 kilograms (130 to 370 lb)
{{convert|60|to(-)|170|kg|lb}} 60 to 170 kilograms (130–370 lb)
{{convert|60|-|170|kg|lb}} 60–170 kilograms (130–370 lb)
{{convert|41|to|50|F|C}} 41 to 50 °F (5 to 10 °C)
{{convert|41|-|50|F|K}} 41–50 °F (278–283 K)
{{convert|60|x|120|m|ft}} 60 by 120 metres (200 ft × 390 ft)
{{convert|60|+/-|10|m|ft}} 60 ± 10 metres (197 ± 33 ft)
{{convert|19|to|27|L|USgal}} 19 to 27 litres (5.0 to 7.1 US gal)
{{convert|5|to|7|L|USgal|abbr=mos}} 5 litres to 7 litres (1.3 to 1.8 US gal)
{{convert|4|-|9|L|USgal|abbr=off}} 4–9 litres (1.1–2.4 US gallons)

The following conversions are currently not available as a range of values:

  • Some imperial and US gallon-based units
  • Other fuel-consumption units, except "mpg" or "L100km" shown above.
  • Large scale units (e3, e6, e9)
  • Combination-based units (ft&in, st&lb, lb&oz) due to complexity of the conversion.

Range/set of 3 or 4 values[àtúnṣe àmìọ̀rọ̀]

Note: not yet operational for all units
Input Displays as
{{convert/3 |2|x|4|x|6|m|ft}} Àdàkọ:Convert/3
{{convert/3 |60|-|70|-|80|kg|lb}} Àdàkọ:Convert/3
{{convert/4 |60|-|70|-|80|-|90|kg|lb}} Àdàkọ:Convert/4
{{convert/3 |60|to|80|or|85|m|ft}} Àdàkọ:Convert/3
{{convert/3 |11|by|15|rarely|16|ft|m}} Àdàkọ:Convert/3
{{convert/3 |41|to|50|to|60|F|C}} Àdàkọ:Convert/3
{{convert/4 |2|to|12|, in summer|25|to|36|C|F}} Àdàkọ:Convert/4
{{convert/3 |41|-|50|almost|51|F|K}} Àdàkọ:Convert/3

For {{convert/3}} or {{convert/4}}, the separator words can be any text.

Parameters[àtúnṣe àmìọ̀rọ̀]

Parameters
Use US spelling attach |sp=us
Make units linked attach |lk=on   to link all units (default: lk=off)
attach |lk=in   to link only the input units
attach |lk=out  to link only the output units
(The manual of style suggests that you should not link common units of measurement).
Use the adjective form, or insert mid-text words attach |adj=on (e.g. "190-foot (58 m) bridge" instead of "190 feet...").
This produces the adjective form—the unit name in the singular with a hyphen (according to the Manual of Style).

attach |adj=mid (e.g. "190-foot bridge (58 m)" as: |adj=mid|bridge

or "190-foot-long bridge (58 m)" as: |adj=mid|-long bridge)

Note 1: Any rounding-parameter should follow the mid-text: "text|0".
Note 2: For adj=mid, must specify both input & output unit-codes.

For example, to convert feet, use "ft|m" or "ft|0":
  • {{convert|9|ft|m|adj=mid|-long}} → 9-foot-long (2.7 m)
To default the output unit-code, set parameter 3 to: 0.
Abbreviate units, or not attach |abbr=on to show unit symbols
attach |abbr=off   to show all unit names in full words
attach |abbr=in to abbreviate input units
attach |abbr=out to abbreviate output units
attach |abbr=values to suppress unit names & show only values. So, {{convert|6|mi|abbr=values}} gives: 6 (9.7).
Change "( )" to display other separators attach |disp=comma to put comma, not brackets/parentheses
attach |disp=or to put "or" between units.
The default value is:  disp=b for brackets/parentheses.
Change "( )" to customized separators attach |disp=x| (begin | end) to show "xx (begin yy end)" See example 1
attach |disp=x|; to show "xx; yy" See example 2
attach |disp=x| (same as |) to show "xx (same as yy)". See example 3
Example 1: {{convert|9|km|mi|disp=x| [|]}}9 kilometres [5.6 mi] (note space before [|)
Example 2: {{convert|9|km|mi|disp=x|;}}9 kilometres;5.6 mi
Example 3: {{convert|10|km|mi|disp=x| (about |)}}10 kilometres (about 6.2 mi) (note spaces used within the code).
Display output only attach |disp=output only to show result number & unit
attach |disp=output number only to show just number
Note when using "disp=output only" then the unit name can still be shown as full words by abbr=off or linked by lk=on.
Display units inverted as reverse order attach |disp=flip  to reverse the order & show output unit first.
So, {{convert|6|km|disp=flip}} shows "3.7 miles (6 km)".
To get symbol "mi" use abbr=in, to abbreviate the input unit (left-side unit).
Display unit name (only) attach |disp=unit to show the unit name for a symbol
The unit name will be plural when the amount is not 1, or hyphenated when adj=on. So, {{convert|2|cuyd|disp=unit}} shows "cubic yards" plural.
Display amounts as table cells attach |disp=table (or |disp=tablecen) Note: For use in tables, the template must start on a new line after a pipe. Only the number will be displayed unless you set |abbr=on, |lk=on, |lk=in or |lk=out. Example: here
Round to a specified number of significant figures attach |sigfig={some integer greater than zero}. In the case of temperatures Celsius or Fahrenheit this refers to the difference with the absolute-zero temperature. For example, at room temperature two significant digits means rounded to tens of degrees.
Round by 5 attach |disp=5  to round the output amount to the nearest 5 units. Not supported for all options.
Let Convert decide the unit to convert to skip the precision parameter (the 3rd or 4th unnamed parameter) e.g. {{convert|100|km|kn}} gives 100 kilometres ([convert: unit mismatch]) and {{convert|100|km}} gives 100 kilometres (62 mi).
Display input value with a fraction {{convert|3/8|in|mm|3|abbr=on}} → 38 in (9.525 mm) or {{convert|11+1/4|in|cm|2|abbr=on}} → 11 14 in (28.58 cm)

For negative amounts, use two minus signs (hyphens): -11-1/4.

Generate a hidden sort key for use with a sortable table attach |sortable=on to generate a hidden sort key so that sortable tables will sort correctly. This uses Àdàkọ:Tp to generate a sort key from the first numeric value. It ignores any additional values, ie, if you use 6|ft|2|in as the value, it will only use the 6 for the sort key. This will cause numeric values to sort in numeric order, ie: 5, 10, 15 instead of 10, 15, 5.

Parameters still under construction[àtúnṣe àmìọ̀rọ̀]

Parameters still under construction. May not work in all situations
disp=5[note 1] The output will be rounded to the nearest 5 units. Might not work when linking unit names.
disp=tablecen[note 1] Similar to disp=table except that the values with be centered within the column. See the tables at La Nouvelle branch, BM-21 Grad for in use examples.
disp=comma[note 1] The two values will be separated by a comma, for situations where the first value is already within parentheses. See the Geography tables on Labrador for an example.
abbr=in Abbreviates only the input unit.
abbr=out Abbreviates only the output unit.
abbr=comma[note 1] "Abbreviates" (removes) commas. For ranges, using abbr=comma conflicts with internal options, so instead, append "nocomma" to a range-word: tonocomma, bynocomma, andnocomma, -nocomma & xnocomma.
abbr=mos For ranges, abbreviates with the input unit repeated, twice. Not to be confused with the specifications at MOS:NUM#Conventions.
disp=br This separates input and output units with a forced line break. This can be useful in tables with limited horizontal space.
disp=sqbr Shows square brackets "[ ]" instead of parentheses "( )" in output. Example: 55 miles [89 km]. This option can be used in direct quotes, to show conversions in editorial brackets. See: attach |disp=x|[|], above, as another way of showing brackets "[ ]".
  1. 1.0 1.1 1.2 1.3 This is a limited, temporary option, until an alternative can be implemented.

Rounding[àtúnṣe àmìọ̀rọ̀]

Convert supports four types of rounding:

Rounding to a given precision
Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest power of 110 this number. For instance, if the result is 8621 and the round number is '-2', the result will be 8600. If the result is '234.0283043' and the round number is '0', the result will be 234.
Rounding to a given number of significant figures
Specify the desired number of significant figures using |sigfig={some integer greater than zero} as noted above.
Default rounding
If neither the desired precision nor the desired number of significant figures is specified, the conversion will be rounded either to a comparable precision as the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is the most precise. An exception to this is temperature, wherein the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is the most precise.
Examples of default rounding
Input Displays as Note
{{convert|550|ft|m|0}} 550 feet (168 m) Approximate value is 167.64 m
{{convert|550|ft|m}} 550 feet (170 m) Rounds to 170, when approximate value is 167.64 m
{{convert|500|ft|m|0}} 500 feet (152 m) Approximate value is 152.4 m
{{convert|500|ft|m}} 500 feet (150 m) Rounds to 150, when approximate value is 152.4 m

Units supported[àtúnṣe àmìọ̀rọ̀]

Abridged list of units supported by {{Convert}}
Explanation
system unit code
(alternative)
symbol/abbreviation notes conversion factor combinations
the system(s) to which the unit belongs units listed by name codes that can be entered when using the template symbols/abbreviations as displayed by the template notes which may pertain to the units in general or specifically to their use in this template conversion factors used by the template to convert to and from the SI base unit codes for multiple conversions


LENGTH
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/m combinations
SI megametre Mm Mm US spelling: megameter
1,000,000
kilometre km km US spelling: kilometer
1,000
  • km mi
metre m m US spelling: meter
1
  • m ft
  • m ftin
centimetre cm cm US spelling: centimeter
0.01
  • cm in
millimetre mm mm US spelling: millimeter
0.001
  • mm in
micrometre μm (um) µm US spelling: micrometer
0.000001
nanometre nm nm US spelling: nanometer
0.000000001
non-SI metric ångström Å
(angstrom)
Å 0.0000000001
Imperial
&
US customary
mile mi mi 1,609.344
  • mi km

Àdàkọ:Convert/furlong Àdàkọ:Convert/chain Àdàkọ:Convert/rd Àdàkọ:Convert/fathom Àdàkọ:Convert/yd

foot ft (foot) ft The foot code will produce foot as the plural form. 0.3048
  • ft m (foot m)

Àdàkọ:Convert/hand

inch in in 0.0254
  • in cm
  • in mm
Other nautical mile nmi nmi the international standard nautical mile
For other nautical miles see the full list.
1,852

Àdàkọ:Convert/pc

light-year ly ly Àdàkọ:Scinote/P1
astronomical unit AU AU 149,597,870,700


AREA
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/m2 combinations
SI ìlọ́poméjì kilometre km2 km2 US spelling: square kilometer
1,000,000
  • km2 sqmi
square metre m2 m2 US spelling: square meter
1
  • m2 sqft
square centimetre cm2 cm2 US spelling: square centimeter
0.0001
  • cm2 sqin
square millimetre mm2 mm² US spelling: square millimeter
0.000001
  • mm2 sqin
non-SI metric

Àdàkọ:Convert/ha

Imperial
&
US customary
square mile sqmi sq mi 2,589,988.110336
  • sqmi km2
acre acre 4,046.856422

Àdàkọ:Convert/sqyd

square foot sqft
(sqfoot)
sq ft The sqfoot code will produce square foot as the plural form. 0.09290304
  • sqft m2 (sqfoot m2)

Àdàkọ:Convert/sqin

  • sqin cm2
Other

Àdàkọ:Convert/sqnmi Àdàkọ:Convert/dunam

tsubo tsubo (400/121)


VOLUME
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/m3 combinations
SI cubic metre m3 m3 US spelling: cubic meter
one kilolitre
1

Àdàkọ:Convert/cm3

cc cc
cubic millimetre mm3 mm³ US spelling: cubic millimeter
0.000000001
non-SI metric kilolitre kl kl US spelling: kiloliter
one cubic metre
1

Àdàkọ:Convert/kL

litre l l US spelling: liter
one cubic decimetre
Triple combinations are also possible. See the full list.
0.001
  • l impgal
  • l USgal
  • l U.S.gal
  • l USdrygal
  • l U.S.drygal
L L
  • L impgal
  • L USgal
  • L U.S.gal
  • L USdrygal
  • L U.S.drygal

Àdàkọ:Convert/cl

cL cL
millilitre ml ml US spelling: milliliter
one cubic centimetre
0.000001
  • ml impoz
  • ml USoz
  • ml U.S.oz

Àdàkọ:Convert/mL

  • mL impoz
  • mL USoz
  • mL U.S.oz
Imperial
&
US customary

Àdàkọ:Convert/cuyd Àdàkọ:Convert/cuft

cubic inch cuin cu in 0.000016387064
Imperial

Àdàkọ:Convert/impbbl Àdàkọ:Convert/impbsh Àdàkọ:Convert/impbu Àdàkọ:Convert/impgal

  • impgal l
  • impgal L
  • impgal USgal
  • impgal U.S.gal
  • impgal USdrygal
  • impgal U.S.drygal

Àdàkọ:Convert/impqt Àdàkọ:Convert/imppt Àdàkọ:Convert/impoz

  • impoz USoz
  • impoz U.S.oz
  • impoz ml
  • impoz mL
US customary
liquid measure

Àdàkọ:Convert/USbbl Àdàkọ:Convert/U.S.bbl Àdàkọ:Convert/oilbbl Àdàkọ:Convert/USbeerbbl Àdàkọ:Convert/U.S.beerbbl Àdàkọ:Convert/USgal

  • USgal l
  • USgal L
  • USgal impgal

Àdàkọ:Convert/U.S.gal

  • USgal l
  • USgal L
  • USgal impgal

Àdàkọ:Convert/USqt Àdàkọ:Convert/U.S.qt Àdàkọ:Convert/USpt Àdàkọ:Convert/U.S.pt Àdàkọ:Convert/USoz

  • USoz ml
  • USoz mL
  • USoz impoz

Àdàkọ:Convert/U.S.oz

  • U.S.oz ml
  • U.S.oz mL
  • U.S.oz impoz
US customary
dry measure

Àdàkọ:Convert/USdrybbl Àdàkọ:Convert/U.S.drybbl Àdàkọ:Convert/USbsh Àdàkọ:Convert/USbu Àdàkọ:Convert/U.S.bsh Àdàkọ:Convert/U.S.bu Àdàkọ:Convert/USdrygal

  • USdrygal l
  • USdrygal L
  • USdrygal impgal

Àdàkọ:Convert/U.S.drygal

  • U.S.drygal l
  • U.S.drygal L
  • U.S.drygal impgal

Àdàkọ:Convert/USdryqt Àdàkọ:Convert/U.S.dryqt Àdàkọ:Convert/USdrypt Àdàkọ:Convert/U.S.drypt


SPEED
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/(m/s) combinations
SI metre per second m/s m/s US spelling: meter per second
1
  • m/s ft/s (m/s foot/s)
non-SI metric kilometre per hour km/h km/h US spelling: kilometer per hour
(5/18)
  • km/h mph
Imperial
&
US customary

Àdàkọ:Convert/mph

  • mph km/h
  • mph kn
foot per second ft/s (foot/s) ft/s The foot/s code will produce foot per second as the plural form. 0.3048
  • ft/s m/s
Maritime units

Àdàkọ:Convert/kn

  • kn mph


FORCE
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/N combinations
SI giganewton GN GN Triple combinations are also possible. See the full list. 1,000,000,000
  • GN LT-f
  • GN LTf
  • GN ST-f
  • GN STf
meganewton MN MN Triple combinations are also possible. See the full list. 1,000,000
  • MN LT-f
  • MN LTf
  • MN ST-f
  • MN STf

Àdàkọ:Convert/kN

  • kN LT-f
  • kN LTf
  • kN ST-f
  • kN STf
newton N N 1
  • N lb-f
  • N lbf
  • N oz-f
  • N ozf

Àdàkọ:Convert/mN

  • mN oz-f
  • mN ozf
  • mN gr-f
  • mN grf

Àdàkọ:Convert/μN

  • μN gr-f
  • μN grf

Àdàkọ:Convert/nN

  • nN gr-f
  • nN grf
cgs megadyne Mdyn Mdyn 10

Àdàkọ:Convert/kdyn Àdàkọ:Convert/dyn Àdàkọ:Convert/mdyn

Metric gravitational units

Àdàkọ:Convert/t-f Àdàkọ:Convert/tf

kilogram-force kg-f kgf 9.80665
kgf kgf

Àdàkọ:Convert/g-f Àdàkọ:Convert/gf

milligram-force mg-f mgf 0.00000980665
mgf mgf
Avoirdupois-based units

Àdàkọ:Convert/pdl

long ton-force LT-f LTf 9,964.01641818352
  • LT-f ST-f
LTf LTf
  • LTf STf
short ton-force ST-f STf 8,896.443230521
  • ST-f LT-f
STf STf
  • STf LTf
pound-force lb-f lbf 4.4482216152605
lbf lbf

Àdàkọ:Convert/oz-f Àdàkọ:Convert/ozf Àdàkọ:Convert/gr-f Àdàkọ:Convert/grf


ENERGY
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/J combinations
SI gigajoule GJ GJ 1,000,000,000
megajoule MJ MJ 1,000,000

Àdàkọ:Convert/kJ Àdàkọ:Convert/hJ Àdàkọ:Convert/daJ

joule J J 1

Àdàkọ:Convert/dJ

centijoule cJ cJ 0.01

Àdàkọ:Convert/mJ Àdàkọ:Convert/μJ Àdàkọ:Convert/nJ

cgs megaerg Merg Merg 0.1

Àdàkọ:Convert/kerg Àdàkọ:Convert/erg

Watt-hour multiples terawatt-hour TWh TWh Àdàkọ:Scinote/P1
TW.h TW·h
gigawatt-hour GWh GWh Àdàkọ:Scinote/P1
GW.h GW·h
megawatt-hour MWh MWh 3,600,000,000
MW.h MW·h

Àdàkọ:Convert/kWh Àdàkọ:Convert/kW.h

watt-hour Wh Wh 3,600
W.h W·h
Electronvolt multiples gigaelectronvolt GeV GeV 0.0000000001602176487
megaelectronvolt MeV MeV Àdàkọ:Scinote/P1

Àdàkọ:Convert/keV Àdàkọ:Convert/eV Àdàkọ:Convert/meV

Calorie multiples Calorie Cal Cal The thermochemical calorie is the default definition. For other definitions see the full list. 4,184
megacalorie Mcal Mcal 4,184,000

Àdàkọ:Convert/kcal Àdàkọ:Convert/cal Àdàkọ:Convert/mcal

pound/ounce-foot/
inch-hour-minute-second

Àdàkọ:Convert/ftpdl Àdàkọ:Convert/ftlbf Àdàkọ:Convert/ftlb-f Àdàkọ:Convert/inlbf Àdàkọ:Convert/inlb-f Àdàkọ:Convert/inozf Àdàkọ:Convert/inoz-f Àdàkọ:Convert/hph

British thermal unit British thermal unit Btu Btu The International Steam Table British thermal unit is the default definition. For other definitions see the full list. 1,055.05585262
BTU BTU
TNT-based units gigatonne of TNT GtTNT Àdàkọ:Scinote/P1
gigaton of TNT GtonTNT
megatonne of TNT MtTNT Àdàkọ:Scinote/P1
megaton of TNT MtonTNT Mt

Àdàkọ:Convert/ktTNT Àdàkọ:Convert/ktonTNT Àdàkọ:Convert/tTNT Àdàkọ:Convert/tonTNT

Other Hartree Eh Eh Àdàkọ:Scinote/P1
rydberg Ry Ry Àdàkọ:Scinote/P1

Àdàkọ:Convert/toe

barrel of oil equivalent BOE BOE 6,117,863,200

Àdàkọ:Convert/cuftnaturalgas

litre-atmosphere latm l·atm 101.325
Latm L·atm

Àdàkọ:Convert/impgalatm Àdàkọ:Convert/USgalatm Àdàkọ:Convert/U.S.galatm


TEMPERATURE
(Full list)
system unit code
(alternative)
abbreviation notes conversion
to kelvin
combinations
SI kelvin K K Triple combinations are also possible. See the full list. [K]
  • K °C (K C)
  • K °R (K R)
  • K °F (K F)
degree Celsius °C (C) °C ([°C]+273.15)
  • °C K (C K)
  • °C °R (C R)
  • °C °F (C F)
Imperial
&
US customary

Àdàkọ:Convert/list of units/rowtempT

  • °R K (R K)
  • °R °C (R C)
  • °R °F (R F)
degree Fahrenheit °F (F) °F (([°F]+459.67)/1.8)
  • °F K (F K)
  • °F °C (F C)
  • °F °R (F R)
Celsius change C-change Example:  {{convert|5|C-change}}
Fahrenheit change F-change Example:  {{convert|10|F-change}}


MASS
(Full list)
system unit code
(alternative)
abbreviation notes conversion factor/kg combinations
SI kilogram kg kg Triple combinations are also possible. See the full list. 1
  • kg lb
  • kg st

Àdàkọ:Convert/g

  • g oz
milligram mg mg 0.000001
  • mg gr

Àdàkọ:Convert/μg

non-SI metric

Àdàkọ:Convert/t

  • t LT
  • t ST
metric ton MT t
  • MT LT
  • MT ST
Avoirdupois long ton LT 2,240 lb
used mostly in the British Commonwealth
Triple combinations are also possible. See the full list.
1,016.0469088
  • LT t
  • LT MT
  • LT ST
long ton
short ton ST 2,000 lb
used mostly in the US
Triple combinations are also possible. See the full list.
907.18474
  • ST t
  • ST MT
  • ST LT

Àdàkọ:Convert/short ton Àdàkọ:Convert/st

  • st kg
  • st lb
pound lb lb Triple combinations are also possible. See the full list. 0.45359237
  • lb kg
  • lb st

Àdàkọ:Convert/oz

  • oz g

Àdàkọ:Convert/drachm Àdàkọ:Convert/dram Àdàkọ:Convert/gr

Troy

Àdàkọ:Convert/ozt

other

Àdàkọ:Convert/carat


TORQUE
(Full list)
system unit code abbreviation notes conversion factor/N·m combinations
Industrial
SI newton metre Nm N·m Triple combinations are also possible. See the full list. 1
  • Nm kg-m
  • Nm ft-lb
Non-SI metric kilogram-meter kg-m kg-m 9.80665
  • kg-m Nm
  • kg-m ft-lb
Imperial
&
US customary
foot-pound ft-lb ft-lb 1.3558
  • ft-lb Nm
  • ft-lb kg-m
Scientific
SI newton metre N-m N·m Triple combinations are also possible. See the full list. 1
  • N-m kgf-m
  • N-m lbf-ft
Non-SI metric kilogram-force meter kgf-m kgf·m 9.80665
  • kgf-m N-m
  • kgf-m lbf-ft
Imperial
&
US customary
pound-foot lbf-ft lbf·ft 1.3558
  • lbf-ft N-m
  • lbf-ft kgf-m
PRESSURE
unit code abbreviation conversion factor/Pa
gigapascal GPa GPa 1,000,000,000
megapascal MPa MPa 1,000,000

Àdàkọ:Convert/kPaÀdàkọ:Convert/hPa

pascal Pa Pa 1

Àdàkọ:Convert/mPaÀdàkọ:Convert/mbarÀdàkọ:Convert/mbÀdàkọ:Convert/dbar

bar bar bar 100,000

Àdàkọ:Convert/kBa

barye ‎Ba Ba 0.1
standard atmosphere atm atm 101,325
torr Torr Torr (20,265/152)

Àdàkọ:Convert/mmHgÀdàkọ:Convert/inHgÀdàkọ:Convert/psi

FUEL EFFICIENCY
unit code
(alternative)
notes combinations
kilometres per litre km/l (km/L) Use km/L to get "km/L"
  • km/l mpgimp
  • km/l mpgus
litres per 100 kilometres l/100 km (L/100 km) Use L/100 km to get "L/100 km"
  • l/100 km mpgimp
  • l/100 km mpgus
litres per kilometre l/km (L/km) Use L/km to get "L/km"
  • l/km impgal/mi
  • l/km usgal/mi
miles per imperial gallon mpgimp
  • mpgimp mpgus
miles per US gallon mpgus (mpgUS, mpgU.S.) Use mpgUS to get "US"

Use mpgU.S. to get "U.S."
mpgus will give "U.S." if spelling is
set to US & "US" otherwise

  • mpgus mpgimp
imperial gallons per mile impgal/mi
  • impgal/mi
US gallons per mile usgal/mi (USgal/mi, U.S.gal/mi) As above with the us vs US vs U.S.
  • usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
POPULATION DENSITY
unit code
(alternative)
notes combinations
inhabitants per square kilometre PD/sqkm PD stands for population density, i.e. humans (inhabitants)
  • PD/sqkm PD/sqmi
per square kilometre /sqkm Used when the word 'inhabitants' would be inappropriate.
  • /sqkm /sqmi
inhabitants per hectare PD/ha
  • PD/ha PD/acre
per hectare /ha
  • /ha /acre
inhabitants per square mile PD/sqmi PD stands for population density, i.e. humans (inhabitants)
  • PD/sqmi PD/sqkm
per square mile /sqmi Used when the word 'inhabitants' would be inappropriate.
  • /sqmi /sqkm
inhabitants per acre PD/acre
  • PD/acre PD/ha
per acre /acre
  • /acre /ha

Examples[àtúnṣe àmìọ̀rọ̀]

See also[àtúnṣe àmìọ̀rọ̀]

  • {{Convinfobox}} for use in infoboxes
  • {{Bbl to t}} for converting barrel of oil to tonnes
  • {{CwtQtrLb to kg}} for converting long hundred weights, quarters and pounds into kilograms
  • {{Decdeg}} for converting degrees, minutes and seconds to decimal degrees
  • {{HMS2Deg}} for converting hour angles, given in hours, minutes and seconds, to decimal degrees
  • {{Miles-chains}} for converting miles and chains to kilometres linking "chains"
  • {{Pop density}} for converting a population and area to a density
  • {{Inflation}} for calculating inflation of Consumer Price Index related prices
  • {{Metricate}}
  • {{RailGauge}} for converting rail (track) gauges
  • {{Convert/scale}} with custom formula for converting any linearly related units
  • Bug 235: Auto unit conversion